1.

Technical Paper
Technical Paper
1. A Study on Local Heat Transfer Enhancement in a Rectangular Dimpled Channel with a Large Aspect Ratio.
Lauffer, D. ; Weigand, B. ; Liebe, R.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
2.

Technical Paper
Technical Paper
2. Review and Understanding on Sweep in Axial Compressor Design.
Ji, L. ; Chen, J. ; Lin, F.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
3.

Technical Paper
Technical Paper
3. Experimental Design of TF/TA Testing for SOF Aircraft
Smith, S.
Pub. info.: AIAA meeting papers on disc.  2005.  [Reston, Va.].  American Institute of Aeronautics and Astronautics
Title of ser.: AIAA Paper : U.S. Air Force T&E Days
Ser. no.: 2005
4.

Technical Paper
Technical Paper
4. Ceramic Recuperator and Turbine......The Key to Achieving a 40 Percent Efficient Microturbine.
McDonald, C.F. ; Rodgers, C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
5.

Technical Paper
Technical Paper
5. Edge Matching - Part II: Numerical Investigations.
Chen, J. ; Ji, L.C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
6.

Technical Paper
Technical Paper
6. Advancements in Force and Attitude Calibration by Integrating Response Surface Methodology and Statistical Quality Control
Parker, P. ; Finley, T.
Pub. info.: AIAA meeting papers on disc.  2005.  [Reston, Va.].  American Institute of Aeronautics and Astronautics
Title of ser.: AIAA Paper : U.S. Air Force T&E Days
Ser. no.: 2005
7.

Technical Paper
Technical Paper
7. Analytical and Computational Study of Radial Loads in Volutes and Collectors.
Chochua, G. ; Koch, J.M. ; Sorokes, J.M.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
8.

Technical Paper
Technical Paper
8. Test and Evaluation of Sensor Platforms in AEDC Space Sensor Test Chambers
Lowry, H. ; Nicholson, R. ; Simpson, R. ; Mead, K. ; Crider, D. ; Breeden, M.
Pub. info.: AIAA meeting papers on disc.  2005.  [Reston, Va.].  American Institute of Aeronautics and Astronautics
Title of ser.: AIAA Paper : U.S. Air Force T&E Days
Ser. no.: 2005
9.

Technical Paper
Technical Paper
9. Detailed Study of pulsating Flow Performance in a Mixed Flow Turbocharger Turbine.
Costall, A. ; Martinez-Botas, R.F. ; Palfreyman, D.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
10.

Technical Paper
Technical Paper
10. Experimental Evaluation of Active Flow Control Mixed-Flow Turbine for Automotive Turbocharger Application.
Pesiridis, A. ; Martinez-Botas, R.F.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
11.

Technical Paper
Technical Paper
11. Influence of Surface Roughness on the Aerodynamic Losses of a Turbine Vane.
Zhang, Q. ; Goodro, M. ; Ligrani, P.M. ; Trindade, R.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
12.

Technical Paper
Technical Paper
12. Space Environment Simulation Capabilities and Developments at AEDC
Crider, D. ; Prebola, J. ; Crews, D.
Pub. info.: AIAA meeting papers on disc.  2005.  [Reston, Va.].  American Institute of Aeronautics and Astronautics
Title of ser.: AIAA Paper : U.S. Air Force T&E Days
Ser. no.: 2005
13.

Technical Paper
Technical Paper
13. Detailed Chemical Kinetic Modeling of JP-8/Jet-A Ignition and Combustion.
Mawid, M.A. ; Park, T.W. ; Sekar, B. ; Arana, C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
14.

Technical Paper
Technical Paper
14. High Fidelity Interceptor Lethality Evaluation in AEDC's Aeroballistic Ranges
Carver, D. ; Campbell, L. ; Roebuck, B.
Pub. info.: AIAA meeting papers on disc.  2005.  [Reston, Va.].  American Institute of Aeronautics and Astronautics
Title of ser.: AIAA Paper : U.S. Air Force T&E Days
Ser. no.: 2005
15.

Technical Paper
Technical Paper
15. Heat Transfer and Pressure Investigation of Dimple Impingement.
Kanokjaruvijit, K. ; Martinez-Botas, R.F.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
16.

Technical Paper
Technical Paper
16. Development of the Full Authority Digital Engine Control (FADEC) System for Enhanced TF40B Gas Turbine on the U.S. Navy's Landing Craft, Air Cushion (LCAC) Vehicles..
Shappell, L. ; Yee, R. ; Myers, L.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
17.

Technical Paper
Technical Paper
17. Micro Gas Turbine Repowering with Inverted Brayton Cycle.
Bianchi, M. ; Pascale, A. ; Montenegro, G.N.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
18.

Technical Paper
Technical Paper
18. Reduced Reaction Mechanisms for Methane and Syngas Combustion in Gas Turbines.
Slavinskaya, N. ; Braun-Unkhoff, M. ; Frank, P.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
19.

Technical Paper
Technical Paper
19. Flow Characteristics Within and Downstream of a Single-Shallow Cylindrical and Spherical Dimple: Effect of Pre-Dimple Boundary Layer Thickness.
Khalatov, A. ; Byerley, A. ; Vincent, R.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
20.

Technical Paper
Technical Paper
20. Performance Evaluation of a Small Size Cogenerative System Based on a PEM Fuel Cell Stack.
Bagnoli, M. ; Pascale, A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
21.

Technical Paper
Technical Paper
21. Cooling Performance of the Steam-Cooled Vane in a Steam Turbine Cascade.
Bohn, D. ; Ren, J. ; Kusterer, K.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
22.

Technical Paper
Technical Paper
22. Experimental and Numerical Study of Impingement on an Airfoil Leading-Edge with and Without Showerhead and Gill Film Holes.
Taslim, M.E. ; Khanicheh, A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
23.

Technical Paper
Technical Paper
23. Local Heat/Mass Transfer Characteristics on a Rotating Blade with Flat Tip in a Low Speed Annular Cascade: Part 1-Near-Tip Surface.
Rhee, D-H. ; Cho, H.H.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
24.

Technical Paper
Technical Paper
24. Effect of Maximum Camber Location on Aerodynamics Performance of Transonic Compressor Blades.
Chen, N.X. ; Zhang, H.W. ; Du, H. ; Xu, Y.J. ; Huang, W.G.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
25.

Technical Paper
Technical Paper
25. Numerical Modeling of Flow and Thermal Patterns Within a Combustor Simulator.
Kunze, V.R. ; Wolff, M. ; Barringer, M.D. ; Thole, K.A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
26.

Technical Paper
Technical Paper
26. Three Dimensional Aerodynamic Optimization for an Ultra- Low Aspect Ratio Transonic Turbine Stator Blade.
Hasenjager, M. ; Sendhoff, B. ; Sonoda, T. ; Arima, T.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
27.

Technical Paper
Technical Paper
27. Practical Use of Unsteady CFD and FEM Forced Response Calculation in the Design of Axial Turbocharger Turbines.
Filsinger, D. ; Frank, C. ; Schafer, O.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
28.

Technical Paper
Technical Paper
28. Experimental Response of a Rotor Supported on Rayleigh Step Gas Bearings.
Zhu, X. ; Andres, L.S.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
29.

Technical Paper
Technical Paper
29. Rotating Stall Characteristics in a Wide Vaneless Diffuser.
Ljevar, S. ; De Lange, H.C. ; Van Steenhoven, A.A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
30.

Technical Paper
Technical Paper
30. An Adaptation Approach for Gas Turbine Design-Point Performance Simulation.
Li, Y.G. ; Pilidis, P. ; Newby, M.A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
31.

Technical Paper
Technical Paper
31. Effects of Inlet Air Cooling, Blade Coolant Air Cooling and Recuperation on the Performance of Combined Cycle Power Plants.
Yadav, R. ; Yadav, P.S.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
32.

Technical Paper
Technical Paper
32. Affordable Smaller Turbofans.
Rodgers, C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
33.

Technical Paper
Technical Paper
33. Measurement of the Inlet Gas Temperature of a Gas Turbine.
Lechner, C. ; Bothien, M.R.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
34.

Technical Paper
Technical Paper
34. Aerodynamic Design of Exo-Skeletal Engine Fan Blades.
Abumeri, G.H. ; Schmidt, J.F. ; Chamis, C.C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
35.

Technical Paper
Technical Paper
35. The Interaction of Turbine Inter- Platform Leakage Flow with the Mainstream Flow.
Reid, K. ; Denton, J. ; Pullan, G. ; Curtis, E. ; Longley, J.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
36.

Technical Paper
Technical Paper
36. A Numerical Approach for the Design of the Compressor Impeller Exit Diameter Variations in a Marine Engine Turbocharger.
Kim, H-W. ; Ryu, S-H. ; Ghal, S-H. ; Ha, J-S. ; Lee, S-K.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
37.

Technical Paper
Technical Paper
37. Influence of Compound Angle on Adiabatic Film Cooling Effectiveness and Heat Transfer Coefficient for a Row of Shaped Film Cooling Holes.
Brauckmann, D. ; Von Wolfersdort, J.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
38.

Technical Paper
Technical Paper
38. Improving the Performance of a Turbine with Low Aspect Ratio Stators by AFT- Loading.
Pullan, G. ; Denton, J. ; Curtis, E.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
39.

Technical Paper
Technical Paper
39. Effects of Corrugation Angle on Flow and Heat Transfer in Cross Corrugation Channels with Sinusoidal Waves.
Yin, J. ; Li, G. ; Feng, Z.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
40.

Technical Paper
Technical Paper
40. Flow Ranges of 8.0: 1 Pressure Ratio Centrifugal Compressors for Aviation Applications.
Rodgers, C.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
41.

Technical Paper
Technical Paper
41. Numerical Investigation of the Rotation on the Film Cooling Over a Flat Surface.
Young, P. ; Ding, S. ; Tao, Z.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
42.

Technical Paper
Technical Paper
42. Dynamic Modeling and Simulation of Distributed Parameter Heat Exchanger.
Zhang, H. ; Weng, S. ; Su, M.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
43.

Technical Paper
Technical Paper
43. Onset of Combustion Instabilities During Transition to Supercritical Fuel Injection in High Pressure Combustor.
Lubarsky, E. ; Shcherbik, D. ; Scarborough, D. ; Bibik, O. ; Zinn, B.T.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
44.

Technical Paper
Technical Paper
44. A Comparison of a Single- and Multiphase Jets in a Crossflow Using LES.
Salewski, M. ; Stankovic, D. ; Fuchs, L.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
45.

Technical Paper
Technical Paper
45. Performance Demonstration of the Full Size Multi Cluster Combustor for DME Under Real Engine Conditions.
Saitou, T. ; Miura, K. ; Inoue, H. ; Kobayashi, N. ; Suzuki, S.-I.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
46.

Technical Paper
Technical Paper
46. Assessment of a 3D Linear Euler Flutter Prediction Tool Using Sector Cascade Test Data.
Martensson, H. ; Vogt, D.M. ; Fransson, T.H.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
47.

Technical Paper
Technical Paper
47. Modeling Unsteady Flow Effects in a 3D Transonic Compressor.
Stridh, M. ; Eriksson, L-E.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
48.

Technical Paper
Technical Paper
48. Thermodynamic Study of Humid Air Gas Turbine Cycle Power Plants.
Yadav, R. ; Yadav, P.S.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
49.

Technical Paper
Technical Paper
49. Aero-Thermodynamic Model for Digital Simulation of Turbofan Engine.
Yadav, R. ; Kapadi, Y. ; Pashikar, A.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005
50.

Technical Paper
Technical Paper
50. The Potential of Electronic High Temperature Devices Based Upon Polymer Derived Ceramics.
Xu, W. ; Kapat, J. ; Chow, L.C. ; An, L. ; Zhang, W.
Pub. info.: A.S.M.E. paper.  2005.  New York, NY.  American Society of Mechanical Engineers
Title of ser.: ASME Technical Paper : GT
Ser. no.: 2005