Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel.

Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel.

著者名:

掲載資料名:

A.S.M.E. paper

シリーズ名:

ASME Technical Paper : GT

シリーズ巻号:

2006

発行年:

2006

通号:

GT2006-91122

ペーパー番号:

GT-2006-91122

総ページ数:

9

出版情報:

New York, NY: American Society of Mechanical Engineers

言語:

英語

請求記号:

A11800

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00052165
シリーズID:	PA00000136
会議名:	ASME Turbo Expo 2006: Power for Land, Sea and Air
回次:	2006
会議開催地:	Barcelona, Spain
会議開催年:	2006.05.08-2006.05.11
論文注記:	ASME Turbo Expo 2006: Power for Land, Sea and Air, Barcelona, Spain, 2006.05.08-2006.05.11

類似資料:

1 国際会議録 Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel Yun Heung Jeon, Suk Hwan Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho American Society of Mechanical Engineers	7 テクニカルペーパー Enhanced Cooling Effectiveness in Full-Coverage Film Cooling System with Impingement Jets. Oh, S.H., Lee, D.H., Kim, K.M., Kim, M.Y., Cho, H.H. American Society of Mechanical Engineers
2 テクニカルペーパー Heat Transfer on Rotating Channel with Various Heights of Pin-Fin. Park, J.S., Kim, K.M., Lee, D.H., Cho, H.H., Chyu, M.K. American Society of Mechanical Engineers	8 テクニカルペーパー Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle Ribs. Ahn, J., Choi, H., Lee, J. S. American Society of Mechanical Engineers
3 テクニカルペーパー Heat/Mass Transfer Characteristics in Angled Ribbed Channels with Various Bleed Ratios and Rotation Numbers. Cho, H.H., Kim, K.M., Park, S.H. American Society of Mechanical Engineers	9 テクニカルペーパー Effects of Rib Turbulator on Heat/Mass Transfer for Impingement/Effusion Cooling with Crossflow Rhee, D., Nam, Y., Cho,H. American Institute of Aeronautics and Astronautics
4 テクニカルペーパー Heat Transfer Measurements in a Rotating Equilateral Triangular Channel with Various Rib Arrangements. Lee, D.H., Rhee, D-H., Cho, H.H., Moon, H-K. American Society of Mechanical Engineers	10 テクニカルペーパー Heat/Mass Transfer Measurement within a Film Cooling Hole of Square and Rectangular Cross Sections. Cho, H.H., Kang, S.G., Rhee, D.H. American Society of Mechanical Engineers
5 テクニカルペーパー An Investigation of Duct Aspect Ratio Effects on Heat/Mass Transfer in a Rotating Duct with 90° Ribs. Kim, K. M., Kim, Y. Y., Rhee, D. H., Cho, H. H. American Society of Mechanical Engineers	11 テクニカルペーパー Optimization of a Channel roughened by Dimples on Opposite Surfaces for Heat Transfer Enhancement. Samad, A., Lee, K-D., Kim, K-Y. American Society of Mechanical Engineers
6 テクニカルペーパー The Combined Effects of Rib Arrangements and Discrete Ribs on Local Heat/Mass Transfer in a Square Duct. Cho, H.H., Lee, S.Y., Wu, S.J. American Society of Mechanical Engineers	12 テクニカルペーパー Local Heat/Mass Transfer Characteristics on a Rotating Blade with Flat Tip in a Low Speed Annular Cascade: Part 1-Near-Tip Surface. Rhee, D-H., Cho, H.H. American Society of Mechanical Engineers

1

2

3

4

5

6

7

8

9

10

11

12