Analysis of Melting in a Mixed Metal Powder Bed with Finite Thickness Subjected to Constant Heat Flux Heating.

Analysis of Melting in a Mixed Metal Powder Bed with Finite Thickness Subjected to Constant Heat Flux Heating.

著者名:

掲載資料名:

A.S.M.E. paper

シリーズ名:

ASME Technical Paper : HT

シリーズ巻号:

2003

発行年:

2003

通号:

HT2003-47289

ペーパー番号:

HT2003-47289

総ページ数:

10

出版情報:

New York, NY: American Society of Mechanical Engineers

言語:

英語

請求記号:

A11800

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00001645
シリーズID:	PA00000189
会議名:	ASME Summer Heat Transfer Conference
回次:	2003
会議開催地:	Las Vegas, Nevada, USA
会議開催年:	2003.07.21-2003.07.23
論文注記:	Summer Heat Transfer Conference, ASME, Las Vegas, NV, USA, 21-23 Jul. 2003

類似資料:

1 テクニカルペーパー Analysis of Melting in a Single- Component Metal Powder Bed Subject to Constant Heat Flux Heating. Xiao, B., Zhang, Y. American Society of Mechanical Engineers	7 テクニカルペーパー Approximate Analytical Solution for One-Dimensional Finite Ablation Problem with Constant Time Heat Flux Braga, W., Mantelli, M., Azevedo, J. American Institute of Aeronautics and Astronautics
2 テクニカルペーパー Melting and Resolidification of a Two-component Metal Powder Layer Heated by a Moving Gaussian Heat Source. Chen, T., Zhang, Y. American Society of Mechanical Engineers	8 テクニカルペーパー X-33 Base-Heating CFD Analysis Zhang,S., Liu,J., Chen,Y., Zhao,X. American Institute of Aeronautics and Astronautics
3 テクニカルペーパー Inverse Heat Conduction in a Finite Slab with Measured Back Surface Temperature and Heat Flux J. Zhou, Y. Zhang, J. Chen, Z. Feng American Institute of Aeronautics and Astronautics	9 テクニカルペーパー Optimization of the Blankholder Thickness for Sheet Metal Forming Using Finite Element Analysis. Neher, W., Weinmann, K.J., Emblom, W.J. Society of Manufacturing Engineers
4 テクニカルペーパー Laminar Mixed Convection in the Entrance Region of Semicircular Duct with Constant Heat Flux Y. El.Hasadi, I. Rustum, A. Abdalla American Institute of Aeronautics and Astronautics	10 テクニカルペーパー Finite Element Analysis of a Brake Disc under Constant Mechanical Loading Qianjin Yang, Baozhi Zhang, Kangrong Ding, Liqiang Song Society of Automotive Engineers
5 テクニカルペーパー Finite Element Reliability Analysis of a Ceramic Exhaust Port Liner Subjected to Thermomechanical Interactions During Casting Huang,David T.Y., Chen,David K.S., Ostrom,David L.Van Society of Automotive Engineers	11 テクニカルペーパー GENSURF: A mesh generator for 3D finite element analysis of surface and corner cracks in finite thickness plates subjected to mode-1 loadings Raju, I. S. National Aeronautics and Space Adminstration
6 テクニカルペーパー Corrections for Convective Heat Flux Gauges Subjected to a Surface Temperature Discontinuity. Kandula, M., Reinarts, T. American Institute of Aeronautics and Astronautics	12 テクニカルペーパー Experimental Study of Microscale Bubble Growth and Departure Dynamic over a Surface with Constant Heat Flux Boundary Condition. Moghaddam, S., Kiger, K.T. American Society of Mechanical Engineers

1

2

3

4

5

6

7

8

9

10

11

12