Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

著者名:

Zhao, W. ( South Carolina Univ. )
Newman, J. C., Jr. ( NASA Langley Research Center )
Sutton, M. A. ( South Carolina Univ. )
Wu, X. R. ( Institute of Aeronautical Materials )
Shivakumar, K. N. ( North Carolina Agricultural and Technical State Univ. )

掲載資料名:

NASA Technical Reports

発行年:

1995

号:

NASA-TM-110144

パート:

NAS 1.15:110144

ペーパー番号:

N96-12990

開始ページ:

1

終了ページ:

64

総ページ数:

64

出版情報:

National Aeronautics and Space Adminstration

言語:

英語

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:

ZA00001432

類似資料:

1 テクニカルペーパー Analysis of surface cracks at hole by a 3-D weight function method with stresses from finite element method Zhao, W., Newman, J. C., Jr., Sutton, M. A., Shivakumar, K. N., Wu, X. R. National Aeronautics and Space Adminstration	7 テクニカルペーパー ZIP2DL: An Elastic-Plastic, Large-Rotation Finite-Element Stress Analysis and Crack-Growth Simulation Program Deng, Xiaomin, Newman, James C., Jr. National Aeronautics and Space Adminstration
2 テクニカルペーパー ZIP3D - AN ELASTIC AND ELASTIC-PLASTIC FINITE-ELEMENT ANALYSIS PROGRAM FOR CRACKED BODIES Shivakumar, K.N., Newman, J.C., Jr. National Aeronautics and Space Adminstration	8 国際会議録 On the Analysis of Crack Interactions Using Weight Function Method V. Rangasamy, X. Wang, R. Bell American Society of Mechanical Engineers
3 テクニカルペーパー Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading Shivakumar, K. N., Newman, J. C., Jr. National Aeronautics and Space Adminstration	9 国際会議録 Finite Element Analysis of Surface Cracks at Corners in Protective Oxide Scales Williamson, R.L., Wright, J.K., Cannon, R.M. Electrochemical Society
4 国際会議録 Application of Weight Function Method for Crack Analysis in Thermal Stress Fields Wu R. X. Kluwer Academic Publishers	10 テクニカルペーパー A Post-Processor for Finite Element Stress-Based Fatigue Analysis. Shang, R., Altenhof, W., Hu, H., Zheng, C., Li, N. Society of Automotive Engineers
5 テクニカルペーパー surf3d: A 3D FINITE-ELEMENT PROGRAM FOR THE ANALYSIS OF SURFACE AND CORNER CRACKS IN SOLIDS SUBJECTED TO MODE-I LOADINGS RAJU, I.S., Newman, J.C., Jr. National Aeronautics and Space Adminstration	11 テクニカルペーパー Orientation effects on the measurement and analysis of critical CTOA in an aluminum alloy sheet Sutton, M. A., Dawicke, D. S., Newman, J. C., Jr. National Aeronautics and Space Adminstration
6 テクニカルペーパー THREE-DIMENSIONAL ELASTIC-PLASTIC ANALYSIS OF SHALLOW CRACKS IN SINGLE-EDGE-CRACK-TENSION SPECIMENS Shivakumar, Kunigal N., Newman, James C., Jr. National Aeronautics and Space Adminstration	12 テクニカルペーパー FINITE-ELEMENT ANALYSIS OF CORNER CRACKS IN RECTANGULAR BARS Raju, L. S. National Aeronautics and Space Administration

1

2

3

4

5

6

7

8

9

10

11

12