Heat/Mass Transfer Characteristics in Angled Ribbed Channels with Various Bleed Ratios and Rotation Numbers.

Heat/Mass Transfer Characteristics in Angled Ribbed Channels with Various Bleed Ratios and Rotation Numbers.

著者名:

掲載資料名:

A.S.M.E. paper

シリーズ名:

ASME Technical Paper : GT

シリーズ巻号:

2007

発行年:

2007

通号:

GT2007-27166

ペーパー番号:

GT2007-27166

総ページ数:

10

出版情報:

New York, NY: American Society of Mechanical Engineers

言語:

英語

請求記号:

A11800

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00052166
シリーズID:	PA00000136
会議名:	ASME Turbo Expo 2007: Power for Land, Sea and Air
回次:	2007
会議開催地:	Montreal, Canada
会議開催年:	2007.05.14-2007.05.17
論文注記:	ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada, 2007.5.14-2007.05.17

類似資料:

1 テクニカルペーパー Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel. Jeon, Y.H., Park, S.H., Kim, K.M., Lee, D.H., Cho, H.H. American Society of Mechanical Engineers	7 テクニカルペーパー Heat Transfer Measurements in a Rotating Equilateral Triangular Channel with Various Rib Arrangements. Lee, D.H., Rhee, D-H., Cho, H.H., Moon, H-K. American Society of Mechanical Engineers
2 国際会議録 Heat/Mass Transfer Characteristics in Angled Ribbed Channels With Various Bleed Ratios and Rotation Numbers Hyung Hee Cho, Kyung Min Kim, Suk Hwan Park, Yun Heung Jeon, Dong Hyun Lee American Society of Mechanical Engineers	8 テクニカルペーパー Enhanced Cooling Effectiveness in Full-Coverage Film Cooling System with Impingement Jets. Oh, S.H., Lee, D.H., Kim, K.M., Kim, M.Y., Cho, H.H. American Society of Mechanical Engineers
3 テクニカルペーパー Heat Transfer on Rotating Channel with Various Heights of Pin-Fin. Park, J.S., Kim, K.M., Lee, D.H., Cho, H.H., Chyu, M.K. American Society of Mechanical Engineers	9 テクニカルペーパー Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) Under High Rotation Numbers. Liu, Y-H., Huh, M., Han, J-C., Chopra, S. American Society of Mechanical Engineers
4 テクニカルペーパー Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs Under High Rotation Numbers. Liu, Y-H., Huh, M., Rhee, D-H., Han, J-C., Moon, H-K. American Society of Mechanical Engineers	10 テクニカルペーパー Effect of Rotation on Heat/Mass Transfer for Impingement/Effusion Cooling Sysm. Cho, H-H., Hong, S. American Society of Mechanical Engineers
5 テクニカルペーパー An Investigation of Duct Aspect Ratio Effects on Heat/Mass Transfer in a Rotating Duct with 90° Ribs. Kim, K. M., Kim, Y. Y., Rhee, D. H., Cho, H. H. American Society of Mechanical Engineers	11 テクニカルペーパー Local Heat/Mass Transfer Characteristics on a Rotating Blade with Flat Tip in a Low Speed Annular Cascade: Part 1-Near-Tip Surface. Rhee, D-H., Cho, H.H. American Society of Mechanical Engineers
6 テクニカルペーパー Characteristics of Syngas Combustion Based on Methane at Various Reforming Ratios. Choi, S.K., Kim, M.K., Chung, S.H., Song, Y.H. Society of Automotive Engineers	12 テクニカルペーパー Local Heat/Mass Transfer Characteristics on a Rotating Blade with Flat Tip in a Low Speed Annular Cascade: Part 2-Tip and Shroud. Rhee, D-H., Cho, H.H. American Society of Mechanical Engineers

1

2

3

4

5

6

7

8

9

10

11

12