Improved High Cycle Fatigue Damage Tolerance of Turbine Engine Compressor Components by Low Plasticity Burnishing (LPB).

Improved High Cycle Fatigue Damage Tolerance of Turbine Engine Compressor Components by Low Plasticity Burnishing (LPB).

著者名:

掲載資料名:

A.S.M.E. paper

シリーズ名:

ASME Technical Paper : GT

シリーズ巻号:

2006

発行年:

2006

通号:

GT2006-90894

ペーパー番号:

GT2006-90894

総ページ数:

6

出版情報:

New York, NY: American Society of Mechanical Engineers

言語:

英語

請求記号:

A11800

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00052165
シリーズID:	PA00000136
会議名:	ASME Turbo Expo 2006: Power for Land, Sea and Air
回次:	2006
会議開催地:	Barcelona, Spain
会議開催年:	2006.05.08-2006.05.11
論文注記:	ASME Turbo Expo 2006: Power for Land, Sea and Air, Barcelona, Spain, 2006.05.08-2006.05.11

類似資料:

1 国際会議録 Improved High Cycle Fatigue Damage Tolerance of Turbine Engine Compressor Components by Low Plasticity Burnishing (LPB) Paul S. Prevéy, N. Jayaraman, Ravi A. Ravindranath, Michael Shepard American Society of Mechanical Engineers	7 国際会議録 Controlled Plasticity Burnishing to Improve the Performance of Friction Stir Processed Ni-Al Bronze P.S. Prevey, D.J. Hornbach, N. Jayaraman Trans Tech Publications
2 テクニカルペーパー Mitigation of Fretting Fatigue Damage in Blade and Disk Pressure Faces with Low Plasticity Burnishing. Prevey, P.S., Jayaraman, N., Ravindranath, R.A., Shepard, M. American Society of Mechanical Engineers	8 テクニカルペーパー Reducing Corrosion Fatigue and SCC Failures in 300M Steel Landing Gear Using Low Plasticity Burnishing. Hornbach, D., Prevey, P. Society of Automotive Engineers
3 テクニカルペーパー Application of Low Plasticity Burnishing to Improve Damage Tolerance of a Ti-6Al-4V First Stage Fan Blades Prevey, P., Hornbach, D., Ravindranath, R., Cammett, J., Depot, U.S. Naval Aviation American Institute of Aeronautics and Astronautics	9 テクニカルペーパー Damage tolerance based life prediction in gas turbine engine blades under vibratory high cycle fatigue Walls, David P., deLaneuville, Robert E., Cunningham, Susan E. The American Society of Mechanical Engineers
4 国際会議録 Mitigation of Fretting Fatigue Damage in Blade and Disk Pressure Faces With Low Plasticity Burnishing Paul S. Prevéy, N. Jayaraman, Ravi A. Ravindranath, Michael Shepard American Society of Mechanical Engineers	10 国際会議録 Improved Fatigue Performance of Friction Stir Welds with Low Plasticity Burnishing: Residual Stress Design and Fatigue Performance Assessment Prevey, P., Mahoney, M. Trans Tech Publications
5 テクニカルペーパー HCF Performance and FOD Tolerance Improvement in Ti-6Al-4V Vane with LPB Treatment Prevey, P., Jayaraman,N., Ravindranath,R. American Institute of Aeronautics and Astronautics	11 テクニカルペーパー APPLICATION OF PROBABILISTIC METHODS USING NESTEM TO IMPROVE RELIABILITY IN THE DESIGN OF TURBINE ENGINE COMPONENTS SUBJECTED TO HIGH CYCLE FATIGUE Patel,Dr.Bhogilal M., Nagpal,Dr.Vinod K., Pai,Dr.Shantaram S. American Institute of Aeronautics and Astronautics
6 テクニカルペーパー Introduction of residual Stresses to Enhance Fatigue Performance in the Initial Design. Prevey, P., Jayaraman, N., Ravindranath, R. American Society of Mechanical Engineers	12 テクニカルペーパー Evaluation of TiMMC for Gas Turbine Engine Rotating Components G. Muschlitz, R. Ravindranath American Institute of Aeronautics and Astronautics

1

2

3

4

5

6

7

8

9

10

11

12