Noise Reduction of a Model-Scale Landing Gear Measured in the Virginia Tech Aeroacoustic Wind Tunnel

Noise Reduction of a Model-Scale Landing Gear Measured in the Virginia Tech Aeroacoustic Wind Tunnel

著者名:

M. Remillieux ( Virginia Polytechnic Institute and State University, Blacksburg, VA )
H. Camargo
P. Ravetta
R. Burdisso
W. Ng

掲載資料名:

AIAA meeting papers on disc

シリーズ名:

AIAA Paper : AIAA/CEAS Aeroacoustics Conference

シリーズ巻号:

2008

発行年:

2008

通号:

2008-2818

ペーパー番号:

AIAA Paper 2008-2818

出版情報:

Reston, Va.: American Institute of Aeronautics and Astronautics

ISSN:

10877215

言語:

英語

請求記号:

A07400/200805 [CD-ROM 2008 Disc 5]

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00050883
シリーズID:	PA00000149
会議名:	AIAA/CEAS Aeroacoustics Conference ; AIAA Aeroacoustics Conference
回次:	14th ; 29th
会議開催地:	Vancouver, British Columbia Canada
会議開催年:	2008.05.05-2008.05.07
論文注記:	14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), 5-7 May 2008, Vancouver, British Columbia Canada

類似資料:

1 テクニカルペーパー Aeroacoustic Study of a 26%-Scale, High-Fidelity, Boeing 777 Main Landing Gear in a Semi-Anechoic-Wind-Tunnel Test Section M. Remillieux, H. Camargo, R. Burdisso, W. Ng American Institute of Aeronautics and Astronautics	7 テクニカルペーパー Noise Source Localization and Optimization of Phased Array Results (LORE) P. Ravetta, R. Burdisso, W. Ng American Institute of Aeronautics and Astronautics
2 テクニカルペーパー Wind Tunnel Aeroacoustic Measurements of a 26%-scale 777 Main Landing Gear Ng, W., Burdisso, R., Ravetta, P. American Institute of Aeronautics and Astronautics	8 テクニカルペーパー Development and Testing of a Novel Acoustic Wind Tunnel Concept Smith, B., Camargo, H., Burdisso, R., Devenport, W. American Institute of Aeronautics and Astronautics
3 テクニカルペーパー Calibration and Demonstration of the New Virginia Tech Anechoic Wind Tunnel M. Remillieux, E. Crede, H. Camargo, R. Burdisso, W. Devenport, M. Rasnick, P. Van Seeters,, A. Chou American Institute of Aeronautics and Astronautics	9 テクニカルペーパー Mechanisms for Model Scale Landing Gear Noise Generation A. Quayle, A. Dowling, H. Babinsky, W. Graham, Y. Liu American Institute of Aeronautics and Astronautics
4 テクニカルペーパー Aerodynamic Measurements of the 777 Main Landing Gear Model A. Ringshia, P. Ravetta, W. Ng, R. Burdisso American Institute of Aeronautics and Astronautics	10 テクニカルペーパー Fan Flow Control for Noise Reduction Part 2: Investigation of Wake-Filling Techniques Langford, M., Minton, C., Ng, W., Estevadeordal, J., Burdisso, R. American Institute of Aeronautics and Astronautics
5 テクニカルペーパー Noise Control of Landing Gears Using Elastic Membrane-Based Fairings P. Ravetta, R. Burdisso, W. Ng American Institute of Aeronautics and Astronautics	11 テクニカルペーパー Fan Flow Control for Noise Reduction Part 3: Rig Testing of Optimal Design Langford, M., Minton, C., Ng, W., Burdisso, R., Halasz, C. American Institute of Aeronautics and Astronautics
6 テクニカルペーパー Screening of Potential Noise Control Devices at Virginia Tech for QTD II Flight Test P. Ravetta, R. Burdisso, W. Ng, M. Khorrami, R. Stoker American Institute of Aeronautics and Astronautics	12 テクニカルペーパー Artificial Reduction of Wind Tunnel Background Noise in Vehicle Wind Noise Testing Hofmann,Lorenz M., Bouzit,Djamel, Murawski,Keith W., Hsueh,Keng D., Janicki,Miles, Haffey,Michael P. Society of Automotive Engineering, Inc.

1

2

3

4

5

6

7

8

9

10

11

12