Fuel Spray Simulation of High-Pressure Swirl-Injector for DISI Engines and Comparison with Laser Diagnostic Measurements.

Fuel Spray Simulation of High-Pressure Swirl-Injector for DISI Engines and Comparison with Laser Diagnostic Measurements.

著者名:

掲載資料名:

2003 SAE world congress : technical paper

シリーズ名:

Society of Automotive Engineers technical paper series

シリーズ巻号:

2003

発行年:

2003

通号:

2003-01-0007

ペーパー番号:

2003-01-0007

総ページ数:

11

出版情報:

Warrendale, Penn.: Society of Automotive Engineers

ISSN:

01487191

言語:

英語

請求記号:

S10400

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00001732
シリーズID:	PA00000058
会議名:	SAE World Congress
回次:	2003
会議開催地:	Detroit, Michigan, USA
会議開催年:	2003.03.03-2003.03.06
論文注記:	2003 SAE World Congress, Detroit, Michigan, 3-6 March 2003; Reprinted From: Computer-Aided Engineering of Vehicle and Engine Systems and Components, SP-1740

類似資料:

1 テクニカルペーパー Fuel Spray Simulation of High-Pressure Swirl- Injector for DISI Engines and Comparison with Laser Diagnostic Measurements Chryssakis, Christos A., Assanis, Dennis N., Lee, Jee-Kuen, Nishida, Keiya Society of Automotive Engineering, Inc.	7 テクニカルペーパー Spray Characterization of High Pressure Gasoline Fuel Injectors with Swirl and Non-Swirl Nozzels Li, S. C., Gebert, K. Society of Automotive Engineers
2 テクニカルペーパー Insight on Early Spray Formation Process of a High-Pressure Swirl Injector for DISI Engines. Lee, J., Nishida, K. Society of Automotive Engineers	8 テクニカルペーパー Spray Characterization of High Pressure Gasoline Fuel Injectors with Swirl and Non-Swirl Nozzels Li,S.C., Gebert,K. Society of Automotive Engineering, Inc.
3 テクニカルペーパー Development and Validation of a Comprehensive CFD Model of Diesel Spray Atomization Accounting for High Weber Numbers. Chryssakis, C., Assanis, D.N., Bae, C. Society of Automotive Engineers	9 テクニカルペーパー A COMPUTER SIMULATION OF THE TURBOCHARGED TURBO COMPOUNDED DIESEL ENGINE SYSTEM: A DESCRIPTION OF THE Assanis, D.N. National Aeronautics and Space Administration
4 テクニカルペーパー Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine. Lechner, G.A., Jacobs, T.J., Chryssakis, C.A., Assanis, D.N., Siewert, R.M. Society of Automotive Engineers	10 テクニカルペーパー Spray Characteristics of a High-Pressure Swirl Injector for DISI Engines under High Ambient Temperature and Pressure Conditions. Kobayashi, Y., Ishima, T., Obokata, T. Society of Automotive Engineers
5 テクニカルペーパー Transient Spray Cone Angles in Pressure-Swirl Injector Sprays. Snyder, J.A., Grover, R.O., Jr., Sick, V., Assanis, D.N. Society of Automotive Engineers	11 テクニカルペーパー Estimation of Air Fuel Ratio of a SI Engine from Exhaust Gas Temperature at Cold Start Condition. Lee, T., Bae, C., Bohac, S.V., Assanis, D.N. Society of Automotive Engineers
6 テクニカルペーパー Breakup Process of an Initial Spray Injected by a D.I. Gasoline Injector-Simultaneous Measurement of Droplet Size and Velocity by Laser Sheet Image Processing … Lee, J., Nishida, K. Society of Automotive Engineers	12 テクニカルペーパー Numerical Simulations in a High Swirl Methanol-Fueled Directly-Injected Engine. Ramadan, B.H., Gray,Jr., C.L., Hamady, F.J., Hellman, K.H., Shock, H.J. Society of Automotive Engineers

1

2

3

4

5

6

7

8

9

10

11

12