Development of Hydroformed High Strength Steel Chassis Part.

Development of Hydroformed High Strength Steel Chassis Part.

著者名:

掲載資料名:

2005 SAE world congress : technical paper

シリーズ名:

Society of Automotive Engineers technical paper series

シリーズ巻号:

2005

発行年:

2005

通号:

2005-01-0091

ペーパー番号:

2005-01-0091

総ページ数:

6

出版情報:

Warrendale, Penn.: Society of Automotive Engineers

ISSN:

01487191

言語:

英語

請求記号:

S10400

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00001678
シリーズID:	PA00000058
会議名:	SAE World Congress, 2005
回次:	2005
会議開催地:	Detroit, MI, USA
会議開催年:	2005.04.11-2005.04.14
論文注記:	SAE World Congress, 2005, Detroit, MI, 11-14 April, 2005 ; Reprinted From: Sheet/Hydro/Gas Forming Technology and Modeling 2005, SP-1953

類似資料:

1 国際会議録 Simulation of Hydroformed High Strength Steel Chassis Parts K.J. Kim, J.S. Kim, B.I. Choi, K.H. Kim, Y.S. Kang Trans Tech Publications	7 テクニカルペーパー Characteristics of Syngas Combustion Based on Methane at Various Reforming Ratios. Choi, S.K., Kim, M.K., Chung, S.H., Song, Y.H. Society of Automotive Engineers
2 テクニカルペーパー Development of High Strength, Fracture Split Steel Connecting Rods. Lee, C.K., Ko, Y.S., Kim, S.H., Park, H.S., Lim, J.D. Society of Automotive Engineers	8 テクニカルペーパー Development of Full-Automated VLM-ST Process and Its Apparatus. Yang, D.Y., Ahn, D.G., Lee, S.H., Kim, H.C., Park, S.K., Kim, C.K. Society of Manufacturing Engineers
3 テクニカルペーパー Application Study of an Automotive Structural Part with Nitrogen-Alloyed High Strength Austenitic Stainless Steel. Kim, K.-Y., Kim, Y.-H., Lee, Y.D., Park, S.-H., Lee, W. Society of Automotive Engineers	9 テクニカルペーパー Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel. Jeon, Y.H., Park, S.H., Kim, K.M., Lee, D.H., Cho, H.H. American Society of Mechanical Engineers
4 テクニカルペーパー Single Stage Driver Airbag Module Development for OOP. Kim, Y.S., Choi, H.H. Society of Automotive Engineers	10 テクニカルペーパー Development of a Reduced Chemical Kinetic Mechanism and Ignition Delay Measurement in a Rapid Compression Machine for CAI Combustion. Kim, Y., Min, K., Kim, M.S., Chung, S.H., Bae, C. Society of Automotive Engineers
5 テクニカルペーパー Effect of Alloying Elements on the Mechanical Properties of the Cold Rolled ULC High Strength Steel Sheets S.J. Kim, S.H. Han, Y.S. Jin Society of Automotive Engineers	11 テクニカルペーパー Failure Mode and Fatigue Behavior of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels. Hong, S.H., Avery, K., Pan, J., Santella, M., Feng, Z. Society of Automotive Engineers
6 テクニカルペーパー Heat/Mass Transfer Characteristics in Angled Ribbed Channels with Various Bleed Ratios and Rotation Numbers. Cho, H.H., Kim, K.M., Park, S.H. American Society of Mechanical Engineers	12 テクニカルペーパー Development of High Comfort Seat Foam and its Physical Properties. Hong, C.-H., Hwang, T.-W., Kim, S.-Y., Choi, S.-M., Park, Y.-J. Society of Automotive Engineers

1

2

3

4

5

6

7

8

9

10

11

12