Erosive burning rate studies of composite propellants under high cross flow velocities

Erosive burning rate studies of composite propellants under high cross flow velocities

著者名:

Krishnan, S. ( Department of Aerospace Engineering, Indian Institute of Technology (Madras), India )
Rajesh, K.K. ( Department of Aerospace Engineering, Indian Institute of Technology (Madras), India )

掲載資料名:

AIAA paper

シリーズ名:

AIAA Paper : AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

シリーズ巻号:

1998

発行年:

1998

通号:

98-3384

ペーパー番号:

98-3384

開始ページ:

1

終了ページ:

8

出版情報:

American Institute of Aeronautics and Astronautics

ISSN:

01463705

言語:

英語

請求記号:

A07400

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00050858
シリーズID:	PA00000151
会議名:	AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
回次:	34th
会議開催地:	Cleveland, OH
会議開催年:	1998.07.13-1998.07.15
論文注記:	34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, July 13-15, 1998/Cleveland, OH

類似資料:

1 テクニカルペーパー Erosive Burning of Ammonium Perchlorate/Hydroxyl-Terminated Polybutadiene Propellants under Supersonic Crossflows Krishnan,S., K.,Rajesh K. American Institute of Aeronautics and Astronautics	7 テクニカルペーパー Nano Additives and Plateau Burning Rates in Composite Solid Propellants M. Stephens, E. Petersen, D. Reid, R. Carro, S. Seal American Institute of Aeronautics and Astronautics
2 テクニカルペーパー Comparative Study of Woven-Roving and Stitch-Bonded Composites Under Low Velocity Impact Loads Krishnan, V., Kelkar, A., Shivakumar, K. American Institute of Aeronautics and Astronautics	8 テクニカルペーパー MODEL FOR NORMAL AND EROSIVE BURNING OF COMPOSITE PROPELLANTS. GODON, J.-C. National Aeronautics and Space Administration
3 テクニカルペーパー EXPLICIT EXPRESSION TO PREDICT THE EROSIVE BURNING RATE OF SOLID PROPELLANTS Wang, S. National Aeronautics and Space Administration	9 テクニカルペーパー Transient Burning Characteristics of JA2 Propellant Using Experimentally Determined Zel'Dovich Map Kuo, K.K., Kumar, S., Zhang, B. American Institute of Aeronautics and Astronautics
4 テクニカルペーパー Burning Rate Characteristics of AP-Based Composite Propellant Using Bimodal AP M. Kohga, S. Yoshida American Institute of Aeronautics and Astronautics	10 テクニカルペーパー Erosive Burning of Aluminized Composite Propellants: X-Ray Absorption Measurement, Correlation and Application Hasegawa, H., Tokudome, S., Hanzawa, M., Kohno, M. American Institute of Aeronautics and Astronautics
5 テクニカルペーパー Casting Process Effect on Composite Solid Propellant Burning Rate Ribereau,D., Breton,P.Le, Ballereau,S. American Institute of Aeronautics and Astronautics	11 テクニカルペーパー Computer Model of Flamelet Distribution on the Burning Surface of a Composite Solid Propellant Sankaralingam, K., Chakravarthy, S. R. American Institute of Aeronautics and Astronautics
6 テクニカルペーパー INTERMITTENT BURNING AND ITS CONTRIBUTION TO PLATEAU BURNING OF COMPOSITE PROPELLANTS Chakravarthy,S.R., Seitzman,J.M., Lillard,R., Price,E.W., Sigman,R.K. American Institute of Aeronautics and Astronautics	12 テクニカルペーパー Pressure dependence of burning rate of ammonium perchlorate-hydrocarbon binder solid propellants Price, E.W., Chakravarthy, S.R., Sigman, R.K., Freeman, J.M. American Institute of Aeronautics and Astronautics

1

2

3

4

5

6

7

8

9

10

11

12