Effects of the feedline and the hydrostatic pocket depth on the flow pattern and pressure distribution

Effects of the feedline and the hydrostatic pocket depth on the flow pattern and pressure distribution

著者名:

Braun, M. J. ( University of Akron )
Dzodzo, M.

掲載資料名:

A.S.M.E. paper

シリーズ名:

ASME Technical Paper : TRIB

シリーズ巻号:

1994

発行年:

1994

通号:

94-Trib-27

ペーパー番号:

94-Trib-27

出版情報:

New York: The American Society of Mechanical Engineers

言語:

英語

請求記号:

A11800

資料種別:

テクニカルペーパー

詳細

TDL書誌ID:	ZA00002513
シリーズID:	PA00000191
論文注記:	Discussion on this paper will be accepted at ASME Headquarters until December 19, 1994

類似資料:

1 テクニカルペーパー A three dimensional model for a hydrostatic journal bearing pocket with an inclined restrictor Braun, M.J., Dzodzo, M.B. American Institute of Aeronautics and Astronautics	7 テクニカルペーパー High-Pressure Pocket Damper Seals: Leakage Rates and Cavity Pressure. Gamal, A.M., Ertas, B.H., Vance, J.M. American Society of Mechanical Engineers
2 テクニカルペーパー A three dimensional model for a hydrostatic bearing Dzodzo, M.B., Braun, M.J. American Institute of Aeronautics and Astronautics	8 テクニカルペーパー Effects of Pore Distributions on Ductility of Thin-Walled High Pressure Die-Cast Magnesium. Choi, K.S., Li, D., Sun, X., Li, M., Allison, J. Society of Automotive Engineers
3 テクニカルペーパー Influences of Recess Geometry and Restrictor Dimension on Flow Patterns and Pressure Distribution of Hydrostatic Bearings. Chen, C-H., Kang, Y., Chang, Y-P., Peng, D-X., Yang, D-W. American Society of Mechanical Engineers	9 テクニカルペーパー Geometrical Effects Flow Characteristics of a Gasoline High Pressure Swirl Injector Ren, W. M., Shen, J., Nally, J. F., Jr. Society of Automotive Engineers
4 テクニカルペーパー The Lubricant Flow Structure and Pressure Generation in a Journal Bearing with Diamond-Knurled Stator Surface. Li, H., Braun, M.J. American Society of Mechanical Engineers	10 テクニカルペーパー Geometrical Effects Flow Characteristics of a Gasoline High Pressure Swirl Injector Ren,W.M., Shen,J., Nally Jr.,J.F. Society of Automotive Engineering, Inc.
5 テクニカルペーパー Determination of Outside Heating Distribution Using an Inverse Algorithm for an Industry Hydrothermal Autoclave with Three- Dimensional Flows. Li, H., Braun, M. J., Wang, G-X., Evans, E. A. American Society of Mechanical Engineers	11 テクニカルペーパー Predicted mass-fraction and concentration distributions for subsonic turbulent mixing flow based on stagnation and static pressure and temperature measurements Gonor, A. L., Khaikine, V. A., Gottlieb, J. J., Blankson, I. M. American Institute of Aeronautics and Astronautics
6 テクニカルペーパー A theoretical and numerical development of the concept of the active control foil bearing(ACFB) Braun, M.J., Choy, F.K., Dzodzo, M., Hsu, J., Veillette, R., Deckler, D. The American Society of Mechanical Engineers	12 テクニカルペーパー The Progressive Spin Inlet - Homogeneous Flow Distributions Under Stringent Conditions Gaiser, G., Oesterle, J., Braun, J., Zacke, P. Society of Automotive Engineering, Inc.

1

2

3

4

5

6

7

8

9

10

11

12