Development of Hydroformed High Strength Steel Chassis Part.

Development of Hydroformed High Strength Steel Chassis Part.

Author(s):

Publication title:

2005 SAE world congress : technical paper

Title of ser.:

Society of Automotive Engineers technical paper series

Ser. no.:

2005

Pub. Year:

2005

No.:

2005-01-0091

Paper no.:

2005-01-0091

Pages:

6

Pub. info.:

Warrendale, Penn.: Society of Automotive Engineers

ISSN:

01487191

Language:

English

Call no.:

S10400

Type:

Technical Paper

Details

TDL ID:	ZA00001678
Series ID:	PA00000058
Conf. info. (Name):	SAE World Congress, 2005
Conf. info. (Number):	2005
Conf. info. (Venue):	Detroit, MI, USA
Conf. info. (Date):	2005.04.11-2005.04.14
Note for article:	SAE World Congress, 2005, Detroit, MI, 11-14 April, 2005 ; Reprinted From: Sheet/Hydro/Gas Forming Technology and Modeling 2005, SP-1953

Similar Items:

1 Conference Proceedings Simulation of Hydroformed High Strength Steel Chassis Parts K.J. Kim, J.S. Kim, B.I. Choi, K.H. Kim, Y.S. Kang Trans Tech Publications	7 Technical Paper Characteristics of Syngas Combustion Based on Methane at Various Reforming Ratios. Choi, S.K., Kim, M.K., Chung, S.H., Song, Y.H. Society of Automotive Engineers
2 Technical Paper Development of High Strength, Fracture Split Steel Connecting Rods. Lee, C.K., Ko, Y.S., Kim, S.H., Park, H.S., Lim, J.D. Society of Automotive Engineers	8 Technical Paper Development of Full-Automated VLM-ST Process and Its Apparatus. Yang, D.Y., Ahn, D.G., Lee, S.H., Kim, H.C., Park, S.K., Kim, C.K. Society of Manufacturing Engineers
3 Technical Paper Application Study of an Automotive Structural Part with Nitrogen-Alloyed High Strength Austenitic Stainless Steel. Kim, K.-Y., Kim, Y.-H., Lee, Y.D., Park, S.-H., Lee, W. Society of Automotive Engineers	9 Technical Paper Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel. Jeon, Y.H., Park, S.H., Kim, K.M., Lee, D.H., Cho, H.H. American Society of Mechanical Engineers
4 Technical Paper Single Stage Driver Airbag Module Development for OOP. Kim, Y.S., Choi, H.H. Society of Automotive Engineers	10 Technical Paper Development of a Reduced Chemical Kinetic Mechanism and Ignition Delay Measurement in a Rapid Compression Machine for CAI Combustion. Kim, Y., Min, K., Kim, M.S., Chung, S.H., Bae, C. Society of Automotive Engineers
5 Technical Paper Effect of Alloying Elements on the Mechanical Properties of the Cold Rolled ULC High Strength Steel Sheets S.J. Kim, S.H. Han, Y.S. Jin Society of Automotive Engineers	11 Technical Paper Failure Mode and Fatigue Behavior of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels. Hong, S.H., Avery, K., Pan, J., Santella, M., Feng, Z. Society of Automotive Engineers
6 Technical Paper Heat/Mass Transfer Characteristics in Angled Ribbed Channels with Various Bleed Ratios and Rotation Numbers. Cho, H.H., Kim, K.M., Park, S.H. American Society of Mechanical Engineers	12 Technical Paper Development of High Comfort Seat Foam and its Physical Properties. Hong, C.-H., Hwang, T.-W., Kim, S.-Y., Choi, S.-M., Park, Y.-J. Society of Automotive Engineers

1

2

3

4

5

6

7

8

9

10

11

12