Comparing Cavitation in Diesel Injectors Based on Different Modeling Approaches.

Comparing Cavitation in Diesel Injectors Based on Different Modeling Approaches.

Author(s):

Mulemane, A.

Publication title:

2004 SAE world congress : technical paper

Title of ser.:

Society of Automotive Engineers technical paper series

Ser. no.:

2004

Pub. Year:

2004

No.:

2004-01-0027

Paper no.:

2004-01-0027

Pages:

16

Pub. info.:

Warrendale, Penn.: Society of Automotive Engineers

ISSN:

01487191

Language:

English

Call no.:

S10400

Type:

Technical Paper

Details

TDL ID:	ZA00001658
Series ID:	PA00000058
Conf. info. (Name):	SAE World Congress, 2004
Conf. info. (Number):	2004
Conf. info. (Venue):	Detroit, Michigan, USA
Conf. info. (Date):	2004.03.08-2004.03.11
Note for article:	SAE World Congress, 2004, Detroit, Michigan, 8-11 March, 2004; Reprinted From: Diesel Fuel Injection and Sprays 2004, SP-1824

Similar Items:

1 Technical Paper Modeling Dynamic Behavior of Diesel Fuel Injection Systems. Mulemane, A., Han, J.-S., Lu, P.-H. Society of Automotive Engineers	7 Technical Paper Modeling Combustion and Emissions of HSDI Diesel Engines Using Injectors with Different Included Spray Angles. Kim, H., Reitz, R.D., Kong, S-C. Society of Automotive Engineers
2 Technical Paper Investigation of Diesel Spray Break-up and Development for Different Nozzle Geometries. Han, J.-S., Lu, P.-H., Xie, X.-B., Lai, M.-C., Henein, N.A. Society of Automotive Engineers	8 Technical Paper Simulation and Analysis of Combustion and Heat Transfer in Low Heat Rejection Diesel Engine Using Two Zone Combustion Model and Different Heat Transfer Models Tamilporai, P., Baluswamy, N., Mannar Jawahar, P., Subramaniyam, S., Chandrasekaran, S., Vijayan, K., Jaichandar, S., … Society of Automotive Engineering, Inc.
3 Technical Paper Spray and Fuel-Air Mixing of the Swirler/Venturi Injectors for Lean Premixed Prevaporized Combustor Im,K., Subramaniyam,S., Mulemane, A., Lai, M. American Institute of Aeronautics and Astronautics	9 Technical Paper Spectral Analysis and Chemiluminescence Imaging of Hydrogen Addition to HSDI Diesel Combustion Under conventional and Low-Temperature Conditions. Lu, P.-H., Xie, X.-B., Lai, M.-C. Society of Automotive Engineers
4 Technical Paper Progress Towards Diesel Combustion Modeling Rutland,C.J., Ayoub,N., Han,Z., Hampson,G., Kong,S.-C., Mather,D., Musculus,M., Patterson,M., Ricart,L., Stephenson,P., … Society of Automotive Engineering, Inc.	10 Technical Paper Simulation and Analysis of Combustion and Heat Transfer in Low Heat Rejection Diesel Engine Using Two Zone Combustion Model and Different Heat Transfer Models. Tamilporai, P., Baluswamy, N., Mannar Jawahar, P., Subramaniyam, S., Chandrasekaran, S. Society of Automotive Engineers
5 Technical Paper Implications of 3-D Internal Flow Simulation on the Design of Inward-Opening Pressure-Swirl Injectors. Lai, M.-C., Lu, P.-H., Yoo, J.-H., Berfrui, B., Varble, D. Society of Automotive Engineers	11 Technical Paper Cavitation Initiation, Its Development and Link with Flow Turbulence in Diesel Injector Nozzles Roth,H., Gavaises,M., Arcoumanis,C. Society of Automotive Engineering, Inc.
6 Technical Paper Optimization of Swirler-Venturi Mixer Geometry for Fuel Reformer Application Peterson, A., Subramaniyam, S., Lai, M., Tacina, R., Tomsik, T., Yen, J., Lee, C. American Institute of Aeronautics and Astronautics	12 Technical Paper Effect of Multi- Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes. Roth, H., Giannadakis, E., Gavaises, M., Arcoumanis, C. Society of Automotive Engineers

1

2

3

4

5

6

7

8

9

10

11

12