Brush seal wear model

Brush seal wear model

Author(s):

Prior, R. ( EG&G Engineered Products, Research and Development Center )
Short, J. ( EG&G Engineered Products, Research and Development Center )
Basu, P. ( EG&G Engineered Products, Research and Development Center )

Publication title:

AIAA paper

Title of ser.:

AIAA Paper : AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

Ser. no.:

1998

Pub. Year:

1998

No.:

98-3170

Paper no.:

98-3170

Page(from):

1

Page(to):

6

Pub. info.:

American Institute of Aeronautics and Astronautics

ISSN:

01463705

Language:

English

Call no.:

A07400

Type:

Technical Paper

Details

TDL ID:	ZA00050858
Series ID:	PA00000151
Conf. info. (Name):	AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
Conf. info. (Number):	34th
Conf. info. (Venue):	Cleveland, OH
Conf. info. (Date):	1998.07.13-1998.07.15
Note for article:	34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, July 13-15, 1998/Cleveland, OH

Similar Items:

1 Technical Paper Advanced brush seal development Short, John F., Basu, Prithwish, Datta, Amitava, Loewenthal, Robert G., Prior, Robert J. American Institute of Aeronautics and Astronautics	7 Technical Paper Advances in hybrid floating brush seals Lattime, S.B., Braun, M.J., Choy, F.K., Hendricks, R.C., Steinetz, B.M. American Institute of Aeronautics and Astronautics
2 Technical Paper A bulk flow model of a brush seal system Hendricks, R. C., Schlumberger, S., Braun, M. J., Choy, F., Mullen, R. L. The American Society of Mechanical Engineers	8 Technical Paper Some Peliminary Results of Brush Seal/Rotor Interference Effects on Leakage at Zero and Low RPM Using a Tapered-Plug Rotor Hendricks, R.C., Proctor, M.P., Schlumberger, J.A., Braun, M.J., Mullen, R.L. National Aeronautics and Space Adminstration
3 Technical Paper An iterative CFD and mechanical brush seal model and comparison with experimental results Chen, L.H., Wood, P.E., Jones, T.V., Chew, J.W. The American Society of Mechanical Engineers	9 Technical Paper A computational model of brush seal bristle deflection Aksit, M.F., Tichy, J.A. American Institute of Aeronautics and Astronautics
4 Technical Paper Brush seals in industrial gas turbines - turbine section interstage sealing Dinc, S., Reluzco, G., Turnquist, N.A., Lawen, J., Kerber, O., Brunner, F., Crum, G., Stuck, A.E., Cromer, R.H., Marks, … American Institute of Aeronautics and Astronautics	10 Technical Paper Kevlar® Fiber Brush Seals for LNG Compressors E. Ruggiero, P. Susini, R. Lusted American Institute of Aeronautics and Astronautics
5 Technical Paper Brush seals in industrial gas turbines Wolfe, C.E., Chiu, R.P., Cromer, R.H., Crum, G.A., Marks, P.T., Stuck, A.E., Turnquist, N.A., Reluzco, G., Dinc, O.S. American Institute of Aeronautics and Astronautics	11 Technical Paper Heat Generation Characteristics of a Carbon Fiber Brush Seal E. Ruggiero, J. Allen, R. Lusted American Institute of Aeronautics and Astronautics
6 Technical Paper Detailed experimental studies of flow in large scale brush seal model and a comparison with CFD predictions Chen, L. H., Wood, P. E., Jones, T. V., Chew, J. W. The American Society of Mechanical Engineers	12 Technical Paper Heat Generation Characteristics of a Kevlar Fiber Brush Seal E. Ruggiero, M. Demiroglu, J. Allen, R. Lusted American Institute of Aeronautics and Astronautics

1

2

3

4

5

6

7

8

9

10

11

12