Nonplanar crack growth using the surface integral method

Nonplanar crack growth using the surface integral method

Author(s):

Forth, Scott C. ( Clarkson University )
Keat, William D.

Publication title:

A.S.M.E. paper

Title of ser.:

ASME Technical Paper : GT

Ser. no.:

1996

Pub. Year:

1996

No.:

96-GT-539

Paper no.:

96-GT-539

Pub. info.:

New York: The American Society of Mechanical Engineers

Language:

English

Call no.:

A11800

Type:

Technical Paper

Details

TDL ID:	ZA00002367
Series ID:	PA00000136
Conf. info. (Name):	International Gas Turbine and Aeroengine Congress & Exhibition
Conf. info. (Number):	1996
Conf. info. (Venue):	Birmingham, UK
Conf. info. (Date):	1996.06.10-1996.06.13
Note for article:	Presented at the International Gas Turbine and Aeroengine Congress & Exhibition Birmingham, UK - June 10-13, 1996 This paper has been accepted for publication in the Transactions of the ASME Discussion of it will be accepted at ASME Headquarters until September 30, 1996

Similar Items:

1 Technical Paper Surface integral and finite element hybrid method for three-dimensional analysis of arbitrarily-shaped surface cracks Keat, William D., Maybury, Daniel M., Annigeri, Balkrishna S. The American Society of Mechanical Engineers	7 Technical Paper Investigation of Thermally Induced Die Cracking for H13 High Pressure Casting Dies using Simulation Methods. Long, A., Thornhill, D., Armstrong, C., Kurokawa, M., Hendry, A. Society of Automotive Engineers
2 Technical Paper Life prediction for complex structures Forth, Scott C., Annigeri, Balkrishna S., Keat, William D. American Society of Mechanical Engineers	8 Technical Paper ANALYSIS OF MIXED-MODE CRACK PROPAGATION USING THE BOUNDARY INTEGRAL METHOD Final Report Mendelsen, A. National Aeronautics and Space Administration
3 Technical Paper Prediction of Draw Bead Coefficient of Friction Using Surface Temperature Carlson,William D., Barber,Gary C. Society of Automotive Engineering, Inc.	9 Technical Paper Estimation of highly dynamic heat flux from surface temperature measurements using the adjoint method Loulou,Tahar, Scott,Elaine P. American Institute of Aeronautics and Astronautics
4 Technical Paper Experimental Study of Dynamic Crack Growth in Unidirectional Graphite/Epoxy Using Digital Image Correlation Method and High-Speed Photography D. Lee, H. Tippur, M. Kirugulige American Institute of Aeronautics and Astronautics	10 Technical Paper Detection and Characterization of Surface Cracking in Sheet Metal Hemming Using Optical Method. Swillo, S.J., Lin, G., Hu, S.J., Iyer, K., Yao, J., Koc, M., Cai, W. Society of Manufacturing Engineers
5 Technical Paper Simple, Passive, Non-Contact Class A Multiplexing Method Using Programmable Surface Acoustic Wave Devices McColl,James R., Browne,Joanne M., Knoll,William C. Society of Automotive Engineering, Inc.	11 Technical Paper Predicting Start of Combustion Using a Modified Knock Integral Method for an HCCI Engine. Swan, K., Shahbakhti, M., Koch, C.R. Society of Automotive Engineers
6 Technical Paper Determination of the R Factor for Fuel Economy Calculations Using Ethanol-Blended Fuels over Two Test Cycles C. Scott Sluder, Brian H. West, Aron D. Butler, Arvon L. Mitcham, William J. Ruona Society of Automotive Engineers	12 Technical Paper Installed Powered Engine Effects on Drag Using a Wake-Integral Method Kusunose, K., Crowder, J. P., Miller, G. D. American Institute of Aeronautics and Astronautics

1

2

3

4

5

6

7

8

9

10

11

12