Blowing Ratio Influence on Jet Mixing Flow Phenomena at the Leading Edge

Blowing Ratio Influence on Jet Mixing Flow Phenomena at the Leading Edge

Author(s):

Bohn, D. ( Institute of Steam and Gas Turbines Aachen University of Technology )
Kusterer, K.

Publication title:

AIAA paper

Title of ser.:

AIAA Paper : Aerospace Sciences Meeting and Exhibit

Ser. no.:

1999

Pub. Year:

1999

No.:

99-0670

Paper no.:

99-0670

Page(from):

1

Page(to):

11

Pub. info.:

American Institute of Aeronautics and Astronautics

ISSN:

01463705

Language:

English

Call no.:

A07400

Type:

Technical Paper

Details

TDL ID:	ZA00050873
Series ID:	PA00000138
Conf. info. (Name):	Aerospace Sciences Meeting and Exhibit
Conf. info. (Number):	37th
Conf. info. (Venue):	Reno, NV
Conf. info. (Date):	1999.01.11-1999.01.14
Note for article:	37th AIAA Aerospace Science Meeting and Exhibit January 11-14, 1999 / Reno, NV

Similar Items:

1 Technical Paper Blowing ratio influence on jet mixing flow phenomena at the leading edge Bohn, D., Kusterer, K. American Institute of Aeronautics and Astronautics	7 Technical Paper Experimental and numerical conjugate investigation of the blowing-ratio influence on the showerhead cooling efficiency Bohn, Dieter E., Becker, Volker J., Kusterer, Karsten A., Rungen, Agnes U. The American Society of Mechanical Engineers
2 Technical Paper Aerothermal investigations of mixing flow phenomena in case of radially inclined ejection holes at the leading edge Bohn, Dieter E., Kusterer, Karsten A. The American Society of Mechanical Engineers	8 Technical Paper The influence of rotation on the internal flow of a cooled turbine blade with serpentine-shaped cooling channels Otsuki, Y., Sugimoto, T., Tanaka, R., Bohn, D. E., Becker, V. J., Gier, J., Kusterer, K. A. The American Society of Mechanical Engineers
3 Technical Paper Influence of Blowing Ratio on the Double-Jet Ejection of Cooling Air. Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R. American Society of Mechanical Engineers	9 Technical Paper Large Eddy Simulation of Leading Edge Film Cooling: Part II - Heat Transfer and Effect of Blowing Ratio. Rozati, A., Tafti, D.K. American Society of Mechanical Engineers
4 Technical Paper Double-Jet Film-Cooling for Highly Efficient Film-Cooling with Low Blowing Ratios. Kusterer, K., Elyas, A., Bohn, D., Sugimoto, T., Tanaka, R. American Society of Mechanical Engineers	10 Technical Paper Double-Jet Ejection of Cooling Air for Improved Film-Cooling. Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R. American Society of Mechanical Engineers
5 Technical Paper 3-D Numerical simulation of the flow through a turbine blade cascade with cooling injection at the leading edge Bohn, Dieter, Kusterer, Karsten, Schonenborn, Harald The American Society of Mechanical Engineers	11 Technical Paper Analysis of The Influence of Cooling Steam Conditions on The Cooling Efficiency of a Steam-Cooled Vane Using The Conjugate Calculation Technique. Kruger, U., Kusterer, K., Lang, G., Rosch, H., Bohn, D., Martens, E. American Society of Mechanical Engineers
6 Technical Paper 3-D conjugate flow and heat transfer investigations of a film-cooled turbine guide vane with defferent blowing ratios Bohn, Dieter E., Heuer, Tom, Kusterer, Karsten A. The American Society of Mechanical Engineers	12 Technical Paper Experimental and numerical conjugate flow and heat transfer investigation of the influence of density ratio and blowing ratio on the film-cooling efficiency of … Bohn, Dieter E., Becker, Volker J., Rungen, Agnes U. The American Society of Mechanical Engineers

1

2

3

4

5

6

7

8

9

10

11

12