Influence of high rotational speeds on heat transfer and oil film thickness in aero engine bearing chambers

Influence of high rotational speeds on heat transfer and oil film thickness in aero engine bearing chambers

Author(s):

Wittig, S. ( Universitat Karisruhe (T. H.) )
Glahn, A.
Himmelsbach, J.

Publication title:

A.S.M.E. paper

Title of ser.:

ASME Technical Paper : GT

Ser. no.:

1993

Pub. Year:

1993

No.:

93-GT-209

Paper no.:

93-GT-209

Pub. info.:

New York, NY: The American Society of Mechanical Engineers

Language:

English

Call no.:

A11800

Type:

Technical Paper

Details

TDL ID:	ZA00002294
Series ID:	PA00000136
Conf. info. (Name):	International Gas Turbine and Aeroengine Congress and Exposition
Conf. info. (Number):	1993
Conf. info. (Venue):	Cincinnati, Ohio
Conf. info. (Date):	1993.05.24-1993.05.27
Note for article:	Presented at the International Gas Turbine and Aeroengine Congress and Exposition Cincinnati, Ohio - May 24-27, 1993 This paper has been accepted for publication in the Transactions of the ASME Discussion of it will be accepted at ASME Headquarters until September 30, 1993

Similar Items:

1 Technical Paper Two-phase air/oil flow in aero engine bearing chambers - Characterization of oil film flows Glahn, A., Wittig, S. The American Society of Mechanical Engineers	7 Technical Paper Film cooling effectiveness and heat transfer coefficients for slot injection at high clowing ratios Bittlinger, G., Schulz, A., Wittig, S. The American Society of Mechanical Engineers
2 Technical Paper Local and mean heat transfer coefficients along the internal housing walls of aero engine bearing chambers Glahn, A., Busam, S., Wittig, S. The American Society of Mechanical Engineers	8 Technical Paper The Determination of Heat Transfer from the Combustion Chambers of SI Engines Shayler,P.J., May,S.A., Ma,T. Society of Automotive Engineering, Inc.
3 Technical Paper Influence of Operating Condition and Geometry on the Oil Film Thickness in Aero-Engine Bearing Chambers. Gorse, P., Busam, S., Dullenkopf, K. American Society of Mechanical Engineers	9 Technical Paper Disintegration of Oil Films Emerging from Radial Holes in a Rotating Cylinder. Glahn, A., Blair, M.F., Allard, K.L., Busan, S., Schafer, O., Wittig, S. American Society of Mechanical Engineers
4 Technical Paper Feasibility study on oil droplet flow investigations inside aero engine bearing chambers - PDPA techniques in combination with numerical approaches Gahn, A., Kurreck, M., Willmann, M., Wittig, S. The American Society of Mechanical Engineers	10 Technical Paper Effect of Oil Rheology on Journal Bearing Performance: Part 2-Oil Film Thickness in the Big-End Bearing of an Operating Engine Bates,T.W., Benwell,S., Evans,P.G. Society of Automotive Engineers
5 Technical Paper Internal bearing chamber wall heat transfer as a function of operating conditions and chamber geometry Busam, Stefan, Glahn, Axel, Wittig, Sigmar The American Society of Mechanical Engineers	11 Technical Paper An Experimental Study on Droplet Generation in Bearing Chambers Caused by Roller Bearings. Gorse, P., Dullenkopf, K., Bauer, H.-J., Wittig, S. American Society of Mechanical Engineers
6 Technical Paper High resolution measurements of local heat transfer coefficients by discrete hole film cooling Baldauf, S., Schulz, A., Wittig, S. The American Society of Mechanical Engineers	12 Technical Paper Impact of Rotational Speed on the Discharge Characteristic of Stepped Labyrinth Seals. Paolillo, R., Moore, S., Cloud, D., Glahn, J.A. American Society of Mechanical Engineers

1

2

3

4

5

6

7

8

9

10

11

12